Sudden Water Heater Breakdown: What to Do Immediately Now

Call Today

Presented here down the page you might get a bunch of sensible points when it comes to No Hot Water — Water Heater Repair.



Many modern residences take advantage of an electrical hot water heater for their heater, as a result of its ease and also simplicity of use. Nevertheless, just like any other electrical devices, troubles might occur with its use, suddenly. It can be really frustrating to awaken to a cool shower rather than a hot one or having your bathroom with water that isn't hot enough or even too warm. Whatever the situation may be, hot water heater issues can be quite aggravating. Luckily, we've made a listing of possible remedies to your water heater issues. There are a variety of elements that could trigger a lot of these troubles, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the major power supply for security. Whatever the trouble is, getting it repaired must not posture way too much of a concern if you adhere to these actions:

Inspect Your Power Supply:


As standard as this may appear, it is extremely necessary. Without ample power, your water heater will not operate. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power issue. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, simply transform it on and off once again. Replace any type of broken or damaged fuse. Evaluate the device with power after these changes to see if it's currently working.

Examine the Heating Element in the Water Heater:


If it's not a power problem, after that try looking into your heating element if it is still functioning. Test each of your burner to be sure the issue isn't with any one of them. If any one of them is defective, change that part and afterwards check whether the hot water is back on.

Check Your Thermostat:


If your hot water heater still isn't functioning or the water coming out isn't warm enough, you may need to examine the temperature setups on your top thermostat. Guarantee the breaker is switched off before doing anything. Open the accessibility panel and press the red button for temperature level reset above the thermostat. This ought to aid heat the water. Turn the breaker back on as well as examine if the trouble has been fixed.

Call A Specialist:


If after changing all faulty parts as well as resetting your temperature, the hot water heater still isn't functioning, you may need to contact a specialist plumber for an expert viewpoint. The problem with your heater could be that the cold and hot faucets have actually been switched or it may be undersized for the amount of warm water needed in your home. Whatever the instance may be, an expert plumber would certainly help address the issue.

Final thought


Water heater problems are not always major. A lot of them are due to minor issues like a blown fuse or damaged burner. Replacing the faulty parts should suffice. Nonetheless, if you are still incapable to fix the issue, give a call to your closest plumber to come to get it taken care of.

Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/



Do you like reading about What Would Cause My Electric Water Heater to Stop Working?? Post a comment further down. We will be delighted to know your ideas about this review. We are looking forward that you come back again later on. Sharing is nice. Helping others is fun. Thanks a lot for your time. Visit us again soon.


Quality and quick, dial!

Leave a Reply

Your email address will not be published. Required fields are marked *